Chain for Forklifts

Chain for Forklift - The life of lift chains on lift trucks can actually be extended significantly with good maintenance and care. Like for instance, correct lubrication is actually the most effective way to extend the service capability of this particular part. It is really essential to apply oil occasionally making use of a brush or whatever lube application device. The frequency and volume of oil application needs to be enough to be able to prevent any rust discoloration of oil within the joints. This reddish brown discoloration generally signals that the lift chains have not been correctly lubricated. If this particular condition has happened, it is really important to lubricate the lift chains at once.

Through lift chain operation it is typical for some metal to metal contact to take place which can result in several components to wear out eventually. Once there is three percent elongation on the lift chain, it is considered by industry standards to have worn out the chain. So as to prevent the scary chance of a disastrous lift chain failure from taking place, the maker greatly suggests that the lift chain be replaced before it reaches 3% elongation. The lift chain lengthens because of progressive joint wear which elongates the chain pitch. This elongation is capable of being measured by placing a certain number of pitches under tension.

In order to ensure proper lift chain maintenance, another factor to think about is to check the clevis pins on the lift chain for signs of wearing. Lift chains are assembled so that the clevis pins have their tapered faces lined up with each other. Normally, rotation of the clevis pins is often caused by shock loading. Shock loading happens if the chain is loose and then all of a sudden a load is applied. This causes the chain to go through a shock as it 'snaps' under the load tension. With no proper lubrication, in this particular case, the pins could rotate in the chain's link. If this scenario takes place, the lift chains have to be replaced instantly. It is essential to always replace the lift chains in pairs so as to ensure even wear.


Click to Download the pdf

Forklift Parts

Parts for Diesel Boom Lift

Parts for Diesel Boom Lifts - Boom lifts are also called aerial work platforms. They can include a platform or bucket which is attached to the end of a hydraulic lifting system. This kind of aerial work platform is normally found mounted on a flat back pickup van, also known as a "Self Drive." Boom lifts are likewise available on...

More

---

Fork Mounted Work Platform

Fork Mounted Work Platform - For the producer to adhere to standards, there are particular standards outlining the standards of lift truck and work platform safety. Work platforms could be custom made as long as it meets all the design criteria according to the safety standards. These custom made platforms must be certified by a professional engineer to maintain they...

More

---

Terex Part

Terex Part - Terex Forklifts takes immense satisfaction in developing quality equipment that helps enhance their customers' efficiency while standing by their mission to provide a cost effective yet reliable product line. Through many divestures and acquisitions planned to expand the product offering, Terex has recently expanded dramatically. They have enhanced their geographic coverage to make it possible for them...

More

---

Electric Boom Lift Attachments

Electric Boom Lift Attachment - The most common description for electric trucks are the type "E" meaning the lift trucks meets the minimum requirements for fire and electrical hazards. All the trucks which are labeled type E are not suitable for use in unsafe locations. Type "ES" lift trucks meet all the requirements of Type "E" lift trucks and have...

More

---

Attachments for Skytrak

Attachment for Skytrak - SkyTrak is proud to be the industries top-selling and most popular trade name of telehandlers, offering an operator friendly and durable solution. Available along with 3 steering modes and outfitted together with a Cummins engine, SkyTrak telehandlers provide the maneuverability and the power required to handle extreme terrain and crowded jobsites. A greater level of operator...

More

---

Articulated Boom Lift Parts

Articulated Boom Lift Parts - A boom truck is frequently recognized by the cable and phone business vehicles that have the extended arm folded over their roofs. Usually, a bucket-like apparatus sits at the extension of extendable arms. Often referred to as a cherry picker, or an aerial boom truck, a bucket vehicle has an extendable boom installed on the...

More

---

Adjustable Boom

Adjustable Booms - An adjustable forklift boom is a really valuable piece of equipment meant for companies that need to reposition heavy objects around. The lift truck itself is a really essential piece of machinery that is essentially a small truck equipped with 2 prongs that are power operated on the front. These prongs could be slid under really heavy...

More

---

Komatsu Forklift Attachments

Komatsu Forklift Attachment - Komatsu Forklift U.S.A. Inc. has an excellent reputation for building dependable and robust lift trucks. Komatsu is recognized around the world as a corporation with a rich heritage while maintaining an exceptional standard of refinement and quality in both design and equipment manufacturing. Komatsu Forklift U.S.A., Inc., a division of Komatsu Forklift Co., Ltd., International Division...

More

---